SHO Digital Instrument Cluster Install


Back to Cluster install

Forward to Extra wiring or Dash trim

Wiring diagrams and Checklists


Chime Module Install

Remove the knee pad below the steering column. Looking in the hole to the right, you will see a module "tree". The chime module is the lowest one (easy way to find it: put key in ignition and open drivers door, the dinging box is the chime module).
Unhook connector from old module and remove old module.
Attach new wiring to existing harness and attach the chime module lead from the digital cluster to the new connector.
Attach new module to tree and connect the wiring to the module.
Put key in ignition and turn to run. Verify that you get a dong from key in ignition and you get beeps when a function button is pushed.


On to the Extra Wiring